Marble Armor is a clear protective polyurethane film that can be applied to stone surfaces to prevent stains, etching and bruising due to heavy impact.

Yes

No

Yes, Marble Armor can wrap over the edge of countertops. 

Marble Armor will not be damaged by using typical household cleaners. You can continue to use your favorite non-abrasive countertop cleaner.

Yes, Marble Armor has withstand temperatures up to 400F.

Replacement frequency will vary depending on the level of traffic and use. Hospitality customers see about 6-10 years before needing replacement. Bars and restaurants replace approximately every 1-4 years and residential customers normally enjoy their Marble Armor for approximately 3-5 years. 

Installation does not create odors or VOCs.  Marble Armor is environmentally safe.

Countertops can be lightly used within 2 hours after an install.  Full bond takes approximately 72 hours.

• After installation you must wait 48 hours to clean the countertops.

• Any drips or stains need to be removed, as soon as, possible with a neutral cleaner.  

• Never use an abrasive cleaner on the film.

• Stubborn stains can be removed with 99% isopropyl alcohol. 

• Light scratches in the film will self-heal in 20-30 minutes at room temperature. In colder conditions, or to accelerate the process, pour warm water (120°F) over the affected area.

• Avoid using high-pressure water near the edges of the film, it can cause the film to lift and/or become damaged.